東莞市明一塑膠原料有限公司為您提供pp1102m螺栓系列。

pp/1102m螺栓系列tpv 3445dn,、pom fc2020d,、pbt 362、pp m180r,、pa6 dpbm 410h2.0,、pc hm-3301gl,、pc/abs 70420l、pa12 tr90nz,、pc nf1009f15,、

pbt gf30hffr1、etfe c-88axpbt sg-4405,、pp 5946wz ,、tpv 241-80、pa6 gp2430a,、pp pp-333,、pa6 kn132v0、petg s-680,、pa46 ts271a1,、

pc vr2820pp 2632 、pp p20b11,、pom rm2309

grivory ht (polyphthalic two formamide)

 

 pp/1102m螺栓系列pp fc9413g ,、pc s3000u、pc/pbt 6620,、pa6 bcf30xh2.0,、pc g-3510h、pa6 tcp1221,、pc exl9414t,、pp r200p-3702、ppo hsp8340nh,、

pc sldm2005,、tpv 2480pa6 pf-100-10、tpee kp3355,、pp 3374x ,、tpe 4023、pp 3761 ,、pp h720p,、etfe ht-2004、pp 100bsr-one,、

eva v18161ppo px100l(粉),、pc lev1700kl、pa66 n3-13fg-1626

when the melting temperature of injection is in the range of 615 - 650 f, the retention time of the material in the barrel is not more than 10 minutes, so the mechanical properties of the injection products are the best. the mold temperature is required at least 275 f in order to get the best product with perfect crystallization&dimensional stability. a part with a thick wall can be injected at a lower mold temperature because of the slow cooling rate. the mold temperature is crul to the optimization of the surface sensitivity of the finished parts. the surface temperature of the mold surface for the mineral filler grade ppa resin for the vacuum plating metal plating metal requires 350 f.

     聯系時請說明是在云商網上看到的此信息,，謝謝,！
     聯系電話：0769-82057504，13713214047,，歡迎您的來電咨詢,！
     本頁網址：http://polopoo.com/cp/51603834.html
     推薦關鍵詞： pc, pa6, pom, pbt, pmma